• A Comparative Study of FESEM and EDX Analyses of Datong Coal
• A mathematical model for the biological treatment of industrial wastewater in a reactor cascade
• A new De-NOx system using powdery catalyst for an incineration flue gas control
• A Novel ITQ-2/TUD-1 Micro-Mesoporous Composite: In-situ Delamination as a Tool for the Preparation of Innovative Materials
• A Novel Route to Polymeric Nanoparticles in CO2-Expanded Media
• A pressure-change pycnometer for rapid determination of the volume of rigid non-porous materials: application to measurement of the density of mineral particles
• A Study on the coagulant behaviour of Polyaluminum Chloride/Chitosan Composite Coagulant for Water Treatment Process
• A Three-Dimensional Sector Model for Solid Flow in a Blast Furnace
• Agglomeration behaviour of model clay and oxide minerals
• Aligning HSE expectations across your business to ensure sustainable HSE performance
• An investigation on the synthesis of the uranium mineral brannerite
• Analysis of Control Configuration Changes for Units in Plants with Recycle
• Analysis of VOC's in Air
• Application of Decision Support System for Thermal Balance Control in the Ironmaking Blast Furnace
• Atomistic dynamic modeling of amylose fragments with different hydration and glycerol concentration: Equilibrium behavior and glass-transition temperature estimation
• Bimetallic Ni-Pd Acidic Catalysts for a Hydro-dehydroxylation Cascade Reaction
• Bioleaching of Copper from Electronic Wastes Using Aspergillus Niger and Acidithiobacillus Thioxidans
• Biological synthesis of copper and copper oxide nanoparticles
• Biomimetic silicification to mimic 3D ornate diatom structures – a myth or a reality?
• Biosolids: Source of energetic fuel and other beneficial use
• Building Carbon Nanotube Fluidic Devices
• Calixarene Derivatives for the Complexation of Cesium and Thallium Cations
• CaO-SiC sorbent for CO₂ capture
• Carbon dioxide sequestration by carbonation of mine tailings
• Carbon nanotubes with improved biocompatibility prepared by template synthesis, which combines catalyst-free chemical vapor deposition (CVD) and chemical doping process
• Catalytic performance of Pt/TiO2 for formic acid oxidation at room temperature
• CFD Simulation of Solid-liquid Stirred Tanks
• Challenging Talented Students in the Engineering Stream
• Characterisation of a brannerite mineral sample
• Characterisation of Zeta Potential at the Flocculated-Dispersed Transition State via Dilute Oxide Suspensions
• Characterization of drum mixers flow regimes using Markov chains
• Comparative study on the performance of a tubular solid oxide fuel cell fueled by ammonia and hydrogen
• Concentration dependent dynamics of polymer solutions: Universal behaviour from coarse-grained simulations
• Conformational Molecular Structure-Interaction Force Correlation in Influencing Effective Steric between Alumina and Malic Acid
• Cu-based catalysts for the low temperature water-gas-shift reaction
• Decolorization and degradation of acid dye in industrial waste water with immobilized titania nanoparticle
• DEM Simulation of Granular Flow in Blast Furnace Material Bin
• Design of an Efficient Cooling Pad for Notebook Computers
• Design of Stable Magnetite Nanoparticles in Biological Media
• Detection of Degradation Products of Monoethanolamine- A Post-Combustion CO2 Capture Solvent
• Development of a Lagrangian-Lagrangian coupling method for solid-liquid flows
• Development of a large scale discrete element modeling for fine particle conveying
• Development of Small Scale Extraction of Phytochemicals from Kakadu Plum
• Development of Wireless Biosensors
• Digested sludge rheology: similarities with soft glassy materials
• Direct low temperature synthesis of carbon nanotubes on Si/SiO2 substrates without using a metal catalyst
• Dissolution studies on synthetic coffinite
• Dynamic Simulation of Wine Fermentation
• Effect of chemical dispersing by colloidal silica on water wettability and oxidation resistance of flake graphite
• Effect of Initial Solution pH on Solubility and Morphology of Struvite Crystals
• Effect of lanthanide promotion on catalytic performance of sol-gel Ni/ Al₂O₃ catalyst in CO₂ dry reforming of methane
• Effect of nanoclay and sorbitol on structure relaxation of extruded high-amylose bionanocomposite via synchrotron radiation
• Effect of Reaction Parameters on Yield and Characteristics of Biodiesel Obtained from Various Vegetable Oils
• Effect of Solid Concentration on Solid-Liquid Mass Transfer in a Mixing Vessel
• Effect of solution concentration and co-solvent ratio on electrospun PEG fibers
• Effect of solution parameters on electrospun PLA/ PCL fibers
• Effect of sugar on Lactobacillus delbrueckii subsp. lactic 313, growth and proteinase production
• Effect of Temperature on Copper and Zinc Hydroxide Formation/Precipitation
• Effects of MgCl₂ concentration on nano-emulsions produced by phase inversion temperature method
• Effects of operational conditions on the electrosorption efficiencies of Capacitive deionization
• Effects of Serum Adsorption on the Biological Impact of TiO² nanoparticle on human lung cell lines in vitro
• Electrochemically engineered nanotubular titania surfaces for controlled and sustained delivery of drugs and drug carriers
• Electrocoagulation with marine microalgae
• Encapsulation of Water with pH-responsive Polymer Grafted Silica Gel Particles
• Energy Consumption and CO2 Emissions Benchmarking and Modelling in Port Kembla Steelworks
• Engineering sustainable paper strength with Poly (amideamine) epichlorohydrin
• Environmental impact improvement through dynamic modeling of treated urban industrial effluent coupled to urban irrigation
• Experimental Study of Gas Diffusivity In Coal Seams, Part 1. Preliminary Result
• Exploring the Structure of Doped TiO2 and Photocatalytic behavior in the Oxidation of Gaseous Acetaldehyde
• Facile low temperature hydrogenolysis of nitriles, imines, and amines by Pd/C: A more complete understanding of hydrogenolysis and nitrile hydrogenation
• Fischer-Tropsch Synthesis (FTS) over Alkaline-Earth (Group II) promoted Molybdenum Carbide Catalysts
• Forensic Petroleum Finger Printing
• Formulation of 5-fluorouracil by the atomized rapid injection solvent extraction (ARISE) process
• Fundamental Studies on Wet Oxidation of Bayer Liquor Organics: Reaction Mechanism
• Geothermal Reboiler Process Development Modelling
• Graphene oxide as an alternative photocatalyst
• Harnessing Renewable Energy by Catalytic Dissociation and Synthesis of Ammonia for Distributed Power Applications
• Heterogeneous Catalytic Oxidation of Organic Compounds for Wastewater Treatment Using Ruthenium Catalysts
• Hydrogen from Ethanol via Steam Reforming in a Plasma reactor
• Hydrogen-rich syngas production from catalytic steam pyrolysis-gasification of biomass on Ni-MCM-41
• Improved CO2 Separation Performance with additive of PEO/PDMS copolymer in PPO membrane for CO2 capture from power plants
• Improving the Anti-fouling and Fouling-release Properties of PVDF UF Membrane by SiO2-polysiloxane Nano-composites
• In situ synthesis and characterization of carbon nanotube- hydroxyapatite composite by sol-gel technique
• In-situ observation of nano-particle behavior under microwave irradiation
• Innovative Process to Extract Keratin Protein from Chicken Feathers
• Insights In The Esterification Of Mallee Wood Bio-Oil Using Amberlyst-70
• Investigating the mechanical pretreatment of cellulose by high intensity ultrasound and ball milling
• Kinetics of Unpromoted and Promoted Skeletal Iron Catalysts
• Lignocellulosic Wastewater Treatment – COD Reduction and Colour Removal
• Low cost adsorbent for process water treatment: A model study
• Low frequency transverse vibration as a fouling limitation strategy in membrane bioreactors
• Measurement of liquid viscosity at high pressure by dynamic light scattering
• Mechanisms for Calcination and Sulfation of Limestone during Oxy-Fuel Combustion
• Membrane application for Polyphenols concentration
• Menaquinone-7 extraction from fermentation medium
• Microdroplet formation in T-junction with a Xanthan gum solution
• Microstructure analysis of mineral ore agglomerates for enhanced processability
• Mineralogical characterisation of three Australian nickel laterites
• Modelling Cryogenic Pressure Swing Adsorption of Carbon Dioxide and Nitrogen from Natural Gas
• Modelling of 2-D Nano-couette Flows
• Modelling the combustion of ternary coal blends
• Monitoring Surfaces of Mineral Particles using Electrochemical Impedance Spectroscopy
• Multi-core friendly Model Predictive Control: Having your cake and eating it too
• Multi-objective optimization of a fluidized bed catalytic cracker unit to minimize CO₂ emissions
• Nanoprecipitation of Poorly Water-Soluble Antioxidant Hesperetin for Improved Solubility and Dissolution
• New Mutual Anti-Solvents Crystallization Method for Organic/Inorganic Substances
• Non-Equilibrium Multiphase Modeling Approach for Convective Drying of Potato Tissues: The Spatial Reaction Engineering Approach (S-REA)
• Nonlinear Analysis for Chemical Processes Based on Incremental Dissipativity
• Novel Bolaamphiphile Templates for Supermicroporous Silicas: Control of Pore Size and Catalysis
• On the effects of geometry and methane reforming kinetics in predicted results from the mechanistic model of a planar SOFC
• Optimisation of a CCS network for eastern mainland Australia
• Optimization of the Hydroxylation Reaction of Epoxidised Rice-Bran Oil using a Surface Response Methodology
• Oxidative dehydrogenation of ethane over NiO-loaded high surface area ZrO₂ catalysts
• Performance Evaluation of Bi-Functional Catalysts for the Synthesis of Dimethyl Ether under Severe Process Conditions
• Performance of Organosilane Functionalized-Diatomaceous Earth Microparticles in Removal of Mercury from Water
• Photocatalytic water splitting over ALi2Ti6O14 (A:2Na, Sr, Ba and Pb) and the effect of transition metal doping on their photocatalytic properties
• Piling and Hopper Flow of Ellipsoidal Particles - A Comparison with Spheres
• Pinch and exergy analysis in drying: A thermodynamic backbone for process optimisation and environmental assessment
• PLA-modified magnesium phosphate bone cement with anti-washout property and degradability
• Polymer nanocomposite synthesis via in-situ emulsion polymerisation for sensor application
• Polynomial Dynamic Controller
• Potential for the Use of Biomass in the Iron and Steel Industry
• Predicting capillary thinning of dilute polymer solution filaments with an improved variable-friction model for polymeric stresses
• Preparation and Characterisation of Perfluorodecalin (PFD) in Water Pickering Emulsion
• Preparation and characterization of macroporous magnesium phosphate cement scaffold for bone regeneration
• Preparation of α-aluminum hydride by antisolvent crystallization
• Preparation of Composite Microparticles for Dissolution Enhancement of a Poorly Water-soluble Anti-malarial Drug
• Preparation of pH-Responsive Core-Cross-Linked Polymer Micelle
• Production of Activated Carbon from Biochars from Mallee Biomass Pyrolysis
• Production of an Activated Carbon with High Specific Surface Area from a Sawdust Mixed with a Nitrogen Compound by Chemical Activation using Potassium Carbonate
• Rapid determination of Beverloo parameters of particulate materials via direct measurement of volumetric flow rate
• Reduced graphene oxide - TiO2 nanotube composite fabricated using a direct anodisation method for photoelectrochemical applications
• Removal of Low Methane Concentration from Mine Ventilation Air by Biofiltration
• Removal of organic contaminants by natural pine cone and pine leaves as adsorbent
• Removal of Residual KOH from Palm Oil Based Biodiesel Using Deep Eutectic Solvents
• Retrofitting Carbon Capture Process to Coal-fired Power Plants: Dynamic Operation and response to market demands
• Reversible addition-fragmentation chain transfer (RAFT) polymerization under microwave irradiation
• Single Step Assembly of Uniform Core-Shell Hybrid Microparticles
• Slag and metallic chemical variation along
• Solar-grade Silicon: Current and Alternative Production Routes
• Strategies and approaches for addressing critical issues in supervisory practice of Engineering Discipline
• Structure and properties of flouroalkylsilane treated nano-titania
• Structure and Thermal Stability of a Protein from Molluscs
• Study of Catalytic Properties of Gold Nanotube Membranes
• Study of hydrodynamic behaviour of fluidised bed with a jet at sub-atmospheric pressures
• Study of titania modified porous alumina membranes for protein transport and separation
• Study on Multi-component adsorption and Pore-size distribution in Carbonaceous Porous Media using Molecular Simulation
• Study on trajectories of granular matter during collapse processes in heaps
• Surface Property Investigation of Manufactured Porous Media by Foam Finishing Technology
• Synergistic Adsorption of Mixture of Alcohols at Water/Air Interface
• Synthesis and Characterisation of Polyacrylamide with Controlled Molar Structure
• Synthesis of flaky YSZ particles for solid oxide fuel cell anode application
• Synthesis of Micrometer-Size Janus Particles Having pH-Responsive Surface at One Side
• Synthesis of Well-Ordered One-Dimensional (1D) TiO2 Nanotube (TNT) Array as Photoelectrode
• Ternary solubilities of anthracene in pressurized binary water/ethanol mixtures at temperatures ranging from 393 K to 473 K
• The Effect of Chitosan Addition on Lactose Crystallinity during Spray Drying
• The Effect of High Shear Wet Milling of recrystallized ibuprofen on its flow properties for solid dosage pharmaceutical formulation
• The effect of incomplete mixing upon the performance of a membrane-coupled anaerobic fermentor
• The Effect of Moisture on the Self-Heating Process in Compost Piles
• The effect of nano sized carbon black on the phase evolution and rheological properties of Al₂O₃- SiC -SiO₂-C castable
• The Spatial & Temporal Distribution of Chromated Copper Arsenate in Waste Fence Posts
• The Treatment of Shower Water Using a Pilot Scale Photocatalytic Reactor
• The wall-effect in hydrogenations under high temperature and pressure water (HTPW) conditions
• Three Dimensional Characterizations of Cells in Interconnected Porous Structure Hydrogel with Focused Ion Beam
• Threonine Amino Acid Mediated Photochemical Synthesis of Au, Ag and Bimetallic Au-Ag Nanoparticles with Antibacterial activity
• Titanate nanostructure phase transformation and its influence on photocatalytic activity
• Transparent fluids for modelling the rheological behaviour of thickened municipal sludge
• Trial use of Recycled Alumina Ladle Bricks as BOS Slag Fluidiser
• Upgrading of low-grade gold ore samples for improved particle characterisation using Micro-CT and SEM/EDX
• Use of Copper and Nickel Oxides as Oxygen Carriers in Chemical Looping Combustion of Victorian Brown Coals
• Using Entrained Flow Pre-drying To Improve The Thermal Efficiency of Lignite Power Stations
• Using Neural Network Modeling in Decolorization and Degradation of Acid Dye with Immobilized Titania Nanoparticle on Sackcloth Fiber
• Why are bacterial flagella helical?

173 abstracts